Tap the cloud, the hook-up plug, the ignition key, the appliances and the light to see which way the power flows.
Installation & safety notes
Warning
This schematic is for guidance purposes only. Kartt Ltd accepts no liability for installation.
Have your 12V DC electrics fitted by a competent person and your 230V AC electrics installed and tested by a qualified electrician.
All equipment shown must be installed correctly and according to manufacturer recommendations.
Correct protective earthing
The HUB and your consumer unit (where applicable) must be earthed to the chassis of the vehicle for correct RCBO operation.
The DC ground and AC chassis earth should use separate connections, at least 300mm apart.
Refer to relevant electrical regulations for correct earthing, and have a qualified electrician check earthing and RCBO operation before use.
Cables & connections
Refer to the user manual for correct cable gauges. You may need a heavier gauge depending on cable length.
Secure lugs correctly to the terminals – no washers between conductors.
Use the manufacturer's torque settings and make sure all screws and bolts are tightened correctly. Maximum of 2 cables per terminal.